Fitted an ignition only ECU which runs off a Ford Zetec coil pack and crank sensor and doesn't use Ford's EDIS module since it has its own built in coil drivers. Far smoother and easier starting set-up than the 4k dizzy. The ECU is a Nodiz Pro. Very easy to wire up and simple mapping software through Bluetooth. It does either 2d or 3d ignition. I have it running 3d using the standard Honda TPS on the bike carbs for load sensing. Loads of cool features such as coolant temp, air temp, VVT controller, tacho output, rev limiter, shift light etc. and a very cool Android dash cluster app which displays it all. Must get the map and carbs tuned 100% yet.
Ford coilpack, crank sensor, Honda TPS.
Type 9 Gearbox
Got a few gaskets and seals for the gearbox while I had it out too. There was more than just in the picture!